In [22]:
# I have just included all the libraries required to go 
# directly to the desired cells without needing to run 
# every single cell for loading the required libraries.
import numpy as np
import cv2 
import matplotlib
import torch
import torch.nn as nn
import torchvision.models as models
import torch.optim as optim
from torchvision import datasets
import torchvision.transforms as transforms
use_cuda = torch.cuda.is_available()
print(use_cuda)
import matplotlib.pyplot as plt                        
%matplotlib inline  
True

Convolutional Neural Networks

Project: Write an Algorithm for a Dog Identification App


In this notebook, some template code has already been provided for you, and you will need to implement additional functionality to successfully complete this project. You will not need to modify the included code beyond what is requested. Sections that begin with '(IMPLEMENTATION)' in the header indicate that the following block of code will require additional functionality which you must provide. Instructions will be provided for each section, and the specifics of the implementation are marked in the code block with a 'TODO' statement. Please be sure to read the instructions carefully!

Note: Once you have completed all of the code implementations, you need to finalize your work by exporting the Jupyter Notebook as an HTML document. Before exporting the notebook to html, all of the code cells need to have been run so that reviewers can see the final implementation and output. You can then export the notebook by using the menu above and navigating to File -> Download as -> HTML (.html). Include the finished document along with this notebook as your submission.

In addition to implementing code, there will be questions that you must answer which relate to the project and your implementation. Each section where you will answer a question is preceded by a 'Question X' header. Carefully read each question and provide thorough answers in the following text boxes that begin with 'Answer:'. Your project submission will be evaluated based on your answers to each of the questions and the implementation you provide.

Note: Code and Markdown cells can be executed using the Shift + Enter keyboard shortcut. Markdown cells can be edited by double-clicking the cell to enter edit mode.

The rubric contains optional "Stand Out Suggestions" for enhancing the project beyond the minimum requirements. If you decide to pursue the "Stand Out Suggestions", you should include the code in this Jupyter notebook.


Why We're Here

In this notebook, you will make the first steps towards developing an algorithm that could be used as part of a mobile or web app. At the end of this project, your code will accept any user-supplied image as input. If a dog is detected in the image, it will provide an estimate of the dog's breed. If a human is detected, it will provide an estimate of the dog breed that is most resembling. The image below displays potential sample output of your finished project (... but we expect that each student's algorithm will behave differently!).

Sample Dog Output

In this real-world setting, you will need to piece together a series of models to perform different tasks; for instance, the algorithm that detects humans in an image will be different from the CNN that infers dog breed. There are many points of possible failure, and no perfect algorithm exists. Your imperfect solution will nonetheless create a fun user experience!

The Road Ahead

We break the notebook into separate steps. Feel free to use the links below to navigate the notebook.

  • Step 0: Import Datasets
  • Step 1: Detect Humans
  • Step 2: Detect Dogs
  • Step 3: Create a CNN to Classify Dog Breeds (from Scratch)
  • Step 4: Create a CNN to Classify Dog Breeds (using Transfer Learning)
  • Step 5: Write your Algorithm
  • Step 6: Test Your Algorithm

Step 0: Import Datasets

Make sure that you've downloaded the required human and dog datasets:

  • Download the dog dataset. Unzip the folder and place it in this project's home directory, at the location /dog_images.

  • Download the human dataset. Unzip the folder and place it in the home directory, at location /lfw.

Note: If you are using a Windows machine, you are encouraged to use 7zip to extract the folder.

In the code cell below, we save the file paths for both the human (LFW) dataset and dog dataset in the numpy arrays human_files and dog_files.

In [20]:
import numpy as np
from glob import glob

# load filenames for human and dog images
human_files = np.array(glob("/data/lfw/*/*"))
dog_files = np.array(glob("/data/dog_images/*/*/*"))

# print number of images in each dataset
print('There are %d total human images.' % len(human_files))
print('There are %d total dog images.' % len(dog_files))
There are 13233 total human images.
There are 8351 total dog images.

Step 1: Detect Humans

In this section, we use OpenCV's implementation of Haar feature-based cascade classifiers to detect human faces in images.

OpenCV provides many pre-trained face detectors, stored as XML files on github. We have downloaded one of these detectors and stored it in the haarcascades directory. In the next code cell, we demonstrate how to use this detector to find human faces in a sample image.

In [28]:
import cv2                
import matplotlib.pyplot as plt                        
%matplotlib inline                               

# extract pre-trained face detector
face_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_frontalface_alt.xml')

# load color (BGR) image
img = cv2.imread(human_files[0])
# convert BGR image to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)

# find faces in image
faces = face_cascade.detectMultiScale(gray)

# print number of faces detected in the image
print('Number of faces detected:', len(faces))

# get bounding box for each detected face
for (x,y,w,h) in faces:
    # add bounding box to color image
    cv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2)
    
# convert BGR image to RGB for plotting
cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)

# display the image, along with bounding box
plt.imshow(cv_rgb)
plt.show()
Number of faces detected: 1

Before using any of the face detectors, it is standard procedure to convert the images to grayscale. The detectMultiScale function executes the classifier stored in face_cascade and takes the grayscale image as a parameter.

In the above code, faces is a numpy array of detected faces, where each row corresponds to a detected face. Each detected face is a 1D array with four entries that specifies the bounding box of the detected face. The first two entries in the array (extracted in the above code as x and y) specify the horizontal and vertical positions of the top left corner of the bounding box. The last two entries in the array (extracted here as w and h) specify the width and height of the box.

Write a Human Face Detector

We can use this procedure to write a function that returns True if a human face is detected in an image and False otherwise. This function, aptly named face_detector, takes a string-valued file path to an image as input and appears in the code block below.

In [2]:
# returns "True" if face is detected in image stored at img_path
def face_detector(img_path):
    img = cv2.imread(img_path)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
    faces = face_cascade.detectMultiScale(gray)
    return len(faces) > 0

(IMPLEMENTATION) Assess the Human Face Detector

Question 1: Use the code cell below to test the performance of the face_detector function.

  • What percentage of the first 100 images in human_files have a detected human face?
  • What percentage of the first 100 images in dog_files have a detected human face?

Ideally, we would like 100% of human images with a detected face and 0% of dog images with a detected face. You will see that our algorithm falls short of this goal, but still gives acceptable performance. We extract the file paths for the first 100 images from each of the datasets and store them in the numpy arrays human_files_short and dog_files_short.

Answer: (You can print out your results and/or write your percentages in this cell)

The performance of the face detector has been printed out.

In [4]:
from tqdm import tqdm

human_files_short = human_files[:100]
dog_files_short = dog_files[:100]

#-#-# Do NOT modify the code above this line. #-#-#

## TODO: Test the performance of the face_detector algorithm 
## on the images in human_files_short and dog_files_short.

num_of_detected_faces = 0

for human_image in human_files_short:
    num_of_detected_faces += face_detector(human_image)
print("The percentage of detected faces in the set of human images: " + str(num_of_detected_faces / len(human_files_short)))
    
num_of_detected_faces = 0 
for dog_image in dog_files_short:
    num_of_detected_faces += face_detector(dog_image)
print("The percentage of detected faces in the set of dog images: " + str(num_of_detected_faces / len(dog_files_short)))
The percentage of detected faces in the set of human images: 0.98
The percentage of detected faces in the set of dog images: 0.17

We suggest the face detector from OpenCV as a potential way to detect human images in your algorithm, but you are free to explore other approaches, especially approaches that make use of deep learning :). Please use the code cell below to design and test your own face detection algorithm. If you decide to pursue this optional task, report performance on human_files_short and dog_files_short.

In [ ]:
### (Optional) 
### TODO: Test performance of anotherface detection algorithm.
### Feel free to use as many code cells as needed.

Step 2: Detect Dogs

In this section, we use a pre-trained model to detect dogs in images.

Obtain Pre-trained VGG-16 Model

The code cell below downloads the VGG-16 model, along with weights that have been trained on ImageNet, a very large, very popular dataset used for image classification and other vision tasks. ImageNet contains over 10 million URLs, each linking to an image containing an object from one of 1000 categories.

In [3]:
import torch
import torchvision.models as models

# define VGG16 model
VGG16 = models.vgg16(pretrained=True)

# check if CUDA is available
use_cuda = torch.cuda.is_available()

# move model to GPU if CUDA is available
if use_cuda:
    VGG16 = VGG16.cuda()
Downloading: "https://download.pytorch.org/models/vgg16-397923af.pth" to /root/.torch/models/vgg16-397923af.pth
100%|██████████| 553433881/553433881 [00:05<00:00, 99128667.71it/s] 

Given an image, this pre-trained VGG-16 model returns a prediction (derived from the 1000 possible categories in ImageNet) for the object that is contained in the image.

(IMPLEMENTATION) Making Predictions with a Pre-trained Model

In the next code cell, you will write a function that accepts a path to an image (such as 'dogImages/train/001.Affenpinscher/Affenpinscher_00001.jpg') as input and returns the index corresponding to the ImageNet class that is predicted by the pre-trained VGG-16 model. The output should always be an integer between 0 and 999, inclusive.

Before writing the function, make sure that you take the time to learn how to appropriately pre-process tensors for pre-trained models in the PyTorch documentation.

In [25]:
from PIL import Image
import torchvision.transforms as transforms

def VGG16_predict(img_path):
    '''
    Use pre-trained VGG-16 model to obtain index corresponding to 
    predicted ImageNet class for image at specified path
    
    Args:
        img_path: path to an image
        
    Returns:
        Index corresponding to VGG-16 model's prediction
    '''
    
    ## TODO: Complete the function.
    ## Load and pre-process an image from the given img_path
    ## Return the *index* of the predicted class for that image
    
    img = Image.open(img_path)
#     normalize = transforms.Normalize(mean=[0.485, 0.456, 0.406],
#                                  std=[0.229, 0.224, 0.225])
#     transform = transforms.toTenser()
    
    transform = transforms.Compose([
        transforms.Resize((224,224)),
        transforms.ToTensor(),
        transforms.Normalize(mean=[0.485, 0.456, 0.406],
                                 std=[0.229, 0.224, 0.225])
    ])
    
    img = transform(img)
    
#     img = torch.from_numpy(img)
    img = torch.unsqueeze(img,0)
#     img = img.permute(0,3,1,2)
#     img = img.type('torch.FloatTensor')
#     print(img.size())


#     print(VGG16(img).size())
    if use_cuda:
        img = img.cuda()
    val, ind = torch.max(VGG16(img), 1)
#     print(ind)
    return int(ind) #predicted class index

(IMPLEMENTATION) Write a Dog Detector

While looking at the dictionary, you will notice that the categories corresponding to dogs appear in an uninterrupted sequence and correspond to dictionary keys 151-268, inclusive, to include all categories from 'Chihuahua' to 'Mexican hairless'. Thus, in order to check to see if an image is predicted to contain a dog by the pre-trained VGG-16 model, we need only check if the pre-trained model predicts an index between 151 and 268 (inclusive).

Use these ideas to complete the dog_detector function below, which returns True if a dog is detected in an image (and False if not).

In [26]:
### returns "True" if a dog is detected in the image stored at img_path
def dog_detector(img_path):
    ## TODO: Complete the function.
    if 151 <= VGG16_predict(img_path) <= 268:
#         print("There is a dog!")
        return True
    else:
#         print("There is no dog!")
        return False
#     return None # true/false

(IMPLEMENTATION) Assess the Dog Detector

Question 2: Use the code cell below to test the performance of your dog_detector function.

  • What percentage of the images in human_files_short have a detected dog?
  • What percentage of the images in dog_files_short have a detected dog?

Answer:

The performance of the dog detector has been printed out.

In [8]:
### TODO: Test the performance of the dog_detector function
### on the images in human_files_short and dog_files_short.
num_of_detected_dogs = 0
for humans in human_files_short:
    num_of_detected_dogs += dog_detector(humans)
print("The number percentage of human images detected as dog: " + str(num_of_detected_dogs / len(human_files_short)))

# human= human_files_short[0]
# num_of_detected_dogs = dog_detector(human)

num_of_detected_dogs = 0
for dogs in dog_files_short:
    num_of_detected_dogs += dog_detector(dogs)
print("The number percentage of dogs images detected as dog: " + str(num_of_detected_dogs / len(human_files_short)))

# dog = dog_files_short[0]
# num_of_detected_dogs = dog_detector(dog)
The number percentage of human images detected as dog: 0.01
The number percentage of dogs images detected as dog: 1.0

We suggest VGG-16 as a potential network to detect dog images in your algorithm, but you are free to explore other pre-trained networks (such as Inception-v3, ResNet-50, etc). Please use the code cell below to test other pre-trained PyTorch models. If you decide to pursue this optional task, report performance on human_files_short and dog_files_short.

In [ ]:
### (Optional) 
### TODO: Report the performance of another pre-trained network.
### Feel free to use as many code cells as needed.

Step 3: Create a CNN to Classify Dog Breeds (from Scratch)

Now that we have functions for detecting humans and dogs in images, we need a way to predict breed from images. In this step, you will create a CNN that classifies dog breeds. You must create your CNN from scratch (so, you can't use transfer learning yet!), and you must attain a test accuracy of at least 10%. In Step 4 of this notebook, you will have the opportunity to use transfer learning to create a CNN that attains greatly improved accuracy.

We mention that the task of assigning breed to dogs from images is considered exceptionally challenging. To see why, consider that even a human would have trouble distinguishing between a Brittany and a Welsh Springer Spaniel.

Brittany Welsh Springer Spaniel

It is not difficult to find other dog breed pairs with minimal inter-class variation (for instance, Curly-Coated Retrievers and American Water Spaniels).

Curly-Coated Retriever American Water Spaniel

Likewise, recall that labradors come in yellow, chocolate, and black. Your vision-based algorithm will have to conquer this high intra-class variation to determine how to classify all of these different shades as the same breed.

Yellow Labrador Chocolate Labrador Black Labrador

We also mention that random chance presents an exceptionally low bar: setting aside the fact that the classes are slightly imabalanced, a random guess will provide a correct answer roughly 1 in 133 times, which corresponds to an accuracy of less than 1%.

Remember that the practice is far ahead of the theory in deep learning. Experiment with many different architectures, and trust your intuition. And, of course, have fun!

(IMPLEMENTATION) Specify Data Loaders for the Dog Dataset

Use the code cell below to write three separate data loaders for the training, validation, and test datasets of dog images (located at dog_images/train, dog_images/valid, and dog_images/test, respectively). You may find this documentation on custom datasets to be a useful resource. If you are interested in augmenting your training and/or validation data, check out the wide variety of transforms!

In [2]:
import os
from torchvision import datasets

### TODO: Write data loaders for training, validation, and test sets
## Specify appropriate transforms, and batch_sizes
train_dir = "/data/dog_images/train"
test_dir = "/data/dog_images/test"
valid_dir = "/data/dog_images/valid"

transform = transforms.Compose([
    transforms.Resize((225,224)),
    transforms.RandomRotation(15),
    transforms.RandomHorizontalFlip(),
    transforms.ToTensor(),
    transforms.Normalize(mean=[0.485, 0.456, 0.406],
        std=[0.229, 0.224, 0.225])
    ])

train_data = datasets.ImageFolder(train_dir, transform=transform)
test_data = datasets.ImageFolder(test_dir, transform=transform)
valid_data = datasets.ImageFolder(valid_dir, transform=transform)
print("number of train data is: " + str(len(train_data)))
print("number of test data is: " + str(len(test_data)))
print("number of valid data is: " + str(len(valid_data)))

batch_size = 20
num_workers = 0
train_loader = torch.utils.data.DataLoader(train_data, batch_size=batch_size, 
                                           num_workers=num_workers, shuffle=True)
test_loader = torch.utils.data.DataLoader(test_data, batch_size=batch_size, 
                                           num_workers=num_workers, shuffle=True)
valid_loader = torch.utils.data.DataLoader(valid_data, batch_size=batch_size, 
                                           num_workers=num_workers, shuffle=True)
number of train data is: 6680
number of test data is: 836
number of valid data is: 835

Question 3: Describe your chosen procedure for preprocessing the data.

  • How does your code resize the images (by cropping, stretching, etc)? What size did you pick for the input tensor, and why?
  • Did you decide to augment the dataset? If so, how (through translations, flips, rotations, etc)? If not, why not?

Answer:

  • I have used resize to keep all the informatioin and the size is set to 224. The input of VGG16 net accepts the sizes of 224 considering the polling layers and the sizes of the linear layers. (Specially the number of neurons for the first linear layer.)

  • In order to avoid overfitting I have decided to rotate some of the pictures and flip some others randomly. Seems that would be a nice practice.

(IMPLEMENTATION) Model Architecture

Create a CNN to classify dog breed. Use the template in the code cell below.

In [3]:
loaders_scratch = {
    'train': train_loader,
    'test': test_loader,
    'valid': valid_loader
}
In [4]:
# Determining how many classes do we have in the training set
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True

max_of_targets = -1

for b, (data, target) in enumerate(loaders_scratch['train']):
    max_val, max_ind = torch.max(target, 0)
    #     print(max_val)
    
    if max_val > max_of_targets:
        max_of_targets = max_val
        print(max_of_targets)
        
num_of_classes = max_of_targets.item()+1
tensor(130)
tensor(132)
In [5]:
import torch.nn as nn
import torch.nn.functional as F

# define the CNN architecture
class Net(nn.Module):
    ### TODO: choose an architecture, and complete the class
    def __init__(self):
        super(Net, self).__init__()
        ## Define layers of a CNN
        self.conv1 = nn.Conv2d(3, 16, 3, padding=1)
        self.conv2 = nn.Conv2d(16, 32, 3, padding=1)
        self.conv3 = nn.Conv2d(32, 64, 3, padding=1)
        self.conv4 = nn.Conv2d(64, 128, 3, padding=1)
        self.fc1 = nn.Linear(14* 14* 128, 500)
        self.fc2 = nn.Linear(500, num_of_classes)
        self.pool_max  = nn.MaxPool2d(2, 2)
        self.drop_out = nn.Dropout(0.2)
        
    def forward(self, x):
        ## Define forward behavior
        x = self.pool_max(F.relu(self.conv1(x)))
        x = self.pool_max(F.relu(self.conv2(x)))
        x = self.pool_max(F.relu(self.conv3(x)))
        x = self.pool_max(F.relu(self.conv4(x)))
        
        #flattening the input for the linear layer
        x = x.view(-1, 14 * 14 * 128)
        x = self.drop_out(x)
        
        x = F.relu(self.fc1(x))
        x = self.drop_out(x)
        
        x = self.fc2(x)
        return x

#-#-# You so NOT have to modify the code below this line. #-#-#

# instantiate the CNN
model_scratch = Net()

# move tensors to GPU if CUDA is available
if use_cuda:
    model_scratch.cuda()

Question 4: Outline the steps you took to get to your final CNN architecture and your reasoning at each step.

Answer: Firstly we should determine the layers responsible for getting the feature map. The depth of the output channels for each convolutional layer are 16, 32, 64, 128. These numbers sound pretty logical. As we have made use of pooling layer of 2 by 2, the heighth and the width of the feature maps got half of the input values and because of that fact the number of input neurons for the first linear layer has been selected to be 14* 14* 128. Before defining the convolutional layers, I have tried to iterate over all the labels to understand how many classes do we have at all in our dataset. To this end, I have saved the largest number for the labels and incremented it by one considering the labels start from 0. The number has been saved in the variable num_of_classes. What is remained to do is to narrow the numbers down from the number of input neurons in the first linear layer to the final number of output classes. I have tried to use one hidden layer for the classifier layer. 500 is a reasonable number to be the number of layers in the hidden layers. Dropout layers also will help us avoid overfitting.

(IMPLEMENTATION) Specify Loss Function and Optimizer

Use the next code cell to specify a loss function and optimizer. Save the chosen loss function as criterion_scratch, and the optimizer as optimizer_scratch below.

In [6]:
import torch.optim as optim

### TODO: select loss function
criterion_scratch = nn.CrossEntropyLoss()

### TODO: select optimizer
optimizer_scratch = optim.SGD(model_scratch.parameters(), lr= 0.01)

(IMPLEMENTATION) Train and Validate the Model

Train and validate your model in the code cell below. Save the final model parameters at filepath 'model_scratch.pt'.

In [7]:
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True

def train(n_epochs, loaders, model, optimizer, criterion, use_cuda, save_path):
    """returns trained model"""
    # initialize tracker for minimum validation loss
    valid_loss_min = np.Inf 
    
    for epoch in range(1, n_epochs+1):
        # initialize variables to monitor training and validation loss
        train_loss = 0.0
        valid_loss = 0.0
        
        ###################
        # train the model #
        ###################
        model.train()
        for batch_idx, (data, target) in enumerate(loaders['train']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
                
            ## find the loss and update the model parameters accordingly
            ## record the average training loss, using something like
            ## train_loss = train_loss + ((1 / (batch_idx + 1)) * (loss.data - train_loss))
            optimizer.zero_grad()
            output = model(data)
            loss = criterion(output, target)
            loss.backward()
            optimizer.step()
            train_loss = train_loss + ((1 / (batch_idx + 1)) * (loss.data - train_loss))
#             train_loss += loss.item() * data.size(0)
            
        ######################    
        # validate the model #
        ######################
        model.eval()
        for batch_idx, (data, target) in enumerate(loaders['valid']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
            
            ## update the average validation loss
            output = model(data)
            loss = criterion(output, target)
            #             valid_loss = loss.item() * data.size(0)
            valid_loss = valid_loss + ((1 / (batch_idx + 1)) * (loss.data - valid_loss))

            #         train_loss = train_loss/len(loaders['train'].dataset)
            #         valid_loss = valid_loss/len(loaders['valid'].dataset)
        
        # print training/validation statistics 
        print('Epoch: {} \tTraining Loss: {:.6f} \tValidation Loss: {:.6f}'.format(
            epoch, 
            train_loss,
            valid_loss
            ))
        
        ## TODO: save the model if validation loss has decreased
        if valid_loss <= valid_loss_min:
            print('Validation loss decreased ({:.6f} --> {:.6f}).  Saving model ...'.format(
            valid_loss_min,
            valid_loss))
            torch.save(model.state_dict(), 'model_scratch.pt')
            valid_loss_min = valid_loss
            
    # return trained model
    return model

# train the model
# model_scratch = train(100, loaders_scratch, model_scratch, optimizer_scratch, 
#                       criterion_scratch, use_cuda, 'model_scratch.pt')

model_scratch = train(25, loaders_scratch, model_scratch, optimizer_scratch, 
                      criterion_scratch, use_cuda, 'model_scratch.pt')


# load the model that got the best validation accuracy
model_scratch.load_state_dict(torch.load('model_scratch.pt'))
Epoch: 1 	Training Loss: 4.886745 	Validation Loss: 4.878131
Validation loss decreased (inf --> 4.878131).  Saving model ...
Epoch: 2 	Training Loss: 4.869140 	Validation Loss: 4.851937
Validation loss decreased (4.878131 --> 4.851937).  Saving model ...
Epoch: 3 	Training Loss: 4.791740 	Validation Loss: 4.698758
Validation loss decreased (4.851937 --> 4.698758).  Saving model ...
Epoch: 4 	Training Loss: 4.625007 	Validation Loss: 4.592084
Validation loss decreased (4.698758 --> 4.592084).  Saving model ...
Epoch: 5 	Training Loss: 4.519054 	Validation Loss: 4.505908
Validation loss decreased (4.592084 --> 4.505908).  Saving model ...
Epoch: 6 	Training Loss: 4.440114 	Validation Loss: 4.426457
Validation loss decreased (4.505908 --> 4.426457).  Saving model ...
Epoch: 7 	Training Loss: 4.339674 	Validation Loss: 4.396970
Validation loss decreased (4.426457 --> 4.396970).  Saving model ...
Epoch: 8 	Training Loss: 4.247923 	Validation Loss: 4.311285
Validation loss decreased (4.396970 --> 4.311285).  Saving model ...
Epoch: 9 	Training Loss: 4.154653 	Validation Loss: 4.263882
Validation loss decreased (4.311285 --> 4.263882).  Saving model ...
Epoch: 10 	Training Loss: 4.076585 	Validation Loss: 4.199790
Validation loss decreased (4.263882 --> 4.199790).  Saving model ...
Epoch: 11 	Training Loss: 3.998065 	Validation Loss: 4.194925
Validation loss decreased (4.199790 --> 4.194925).  Saving model ...
Epoch: 12 	Training Loss: 3.906515 	Validation Loss: 4.128135
Validation loss decreased (4.194925 --> 4.128135).  Saving model ...
Epoch: 13 	Training Loss: 3.830053 	Validation Loss: 4.109774
Validation loss decreased (4.128135 --> 4.109774).  Saving model ...
Epoch: 14 	Training Loss: 3.750795 	Validation Loss: 4.074160
Validation loss decreased (4.109774 --> 4.074160).  Saving model ...
Epoch: 15 	Training Loss: 3.637477 	Validation Loss: 4.015558
Validation loss decreased (4.074160 --> 4.015558).  Saving model ...
Epoch: 16 	Training Loss: 3.552711 	Validation Loss: 4.033634
Epoch: 17 	Training Loss: 3.446814 	Validation Loss: 4.076896
Epoch: 18 	Training Loss: 3.317819 	Validation Loss: 4.105228
Epoch: 19 	Training Loss: 3.200204 	Validation Loss: 4.070413
Epoch: 20 	Training Loss: 3.073462 	Validation Loss: 4.245305
Epoch: 21 	Training Loss: 2.941295 	Validation Loss: 4.201667
Epoch: 22 	Training Loss: 2.815497 	Validation Loss: 4.155260
Epoch: 23 	Training Loss: 2.616031 	Validation Loss: 4.441003
Epoch: 24 	Training Loss: 2.456913 	Validation Loss: 4.404645
Epoch: 25 	Training Loss: 2.314602 	Validation Loss: 4.449808

(IMPLEMENTATION) Test the Model

Try out your model on the test dataset of dog images. Use the code cell below to calculate and print the test loss and accuracy. Ensure that your test accuracy is greater than 10%.

In [14]:
def test(loaders, model, criterion, use_cuda):

    # monitor test loss and accuracy
    test_loss = 0.
    correct = 0.
    total = 0.

    model.eval()
    for batch_idx, (data, target) in enumerate(loaders['test']):
        # move to GPU
        if use_cuda:
            data, target = data.cuda(), target.cuda()
        # forward pass: compute predicted outputs by passing inputs to the model
        output = model(data)
        # calculate the loss
        loss = criterion(output, target)
        # update average test loss 
        test_loss = test_loss + ((1 / (batch_idx + 1)) * (loss.data - test_loss))
        # convert output probabilities to predicted class
        pred = output.data.max(1, keepdim=True)[1]
        # compare predictions to true label
        correct += np.sum(np.squeeze(pred.eq(target.data.view_as(pred))).cpu().numpy())
        total += data.size(0)
            
    print('Test Loss: {:.6f}\n'.format(test_loss))

    print('\nTest Accuracy: %2d%% (%2d/%2d)' % (
        100. * correct / total, correct, total))
In [9]:
# call test function    
test(loaders_scratch, model_scratch, criterion_scratch, use_cuda)
Test Loss: 4.041564


Test Accuracy: 11% (92/836)

Step 4: Create a CNN to Classify Dog Breeds (using Transfer Learning)

You will now use transfer learning to create a CNN that can identify dog breed from images. Your CNN must attain at least 60% accuracy on the test set.

(IMPLEMENTATION) Specify Data Loaders for the Dog Dataset

Use the code cell below to write three separate data loaders for the training, validation, and test datasets of dog images (located at dogImages/train, dogImages/valid, and dogImages/test, respectively).

If you like, you are welcome to use the same data loaders from the previous step, when you created a CNN from scratch.

In [7]:
## TODO: Specify data loaders
## TODO: Specify data loaders
import os
from torchvision import datasets

### TODO: Write data loaders for training, validation, and test sets
## Specify appropriate transforms, and batch_sizes
train_dir = "/data/dog_images/train"
test_dir = "/data/dog_images/test"
valid_dir = "/data/dog_images/valid"

transform = transforms.Compose([
    transforms.RandomResizedCrop(224),
    transforms.RandomRotation(15),
    transforms.RandomHorizontalFlip(),
    transforms.ToTensor(),
    transforms.Normalize(mean=[0.485, 0.456, 0.406],
        std=[0.229, 0.224, 0.225])
    ])

train_data = datasets.ImageFolder(train_dir, transform=transform)
test_data = datasets.ImageFolder(test_dir, transform=transform)
valid_data = datasets.ImageFolder(valid_dir, transform=transform)
print("number of train data is: " + str(len(train_data)))
print("number of test data is: " + str(len(test_data)))
print("number of valid data is: " + str(len(valid_data)))

batch_size = 15
num_workers = 0
train_loader = torch.utils.data.DataLoader(train_data, batch_size=batch_size, 
                                           num_workers=num_workers, shuffle=True)
test_loader = torch.utils.data.DataLoader(test_data, batch_size=batch_size, 
                                           num_workers=num_workers, shuffle=True)
valid_loader = torch.utils.data.DataLoader(valid_data, batch_size=batch_size, 
                                           num_workers=num_workers, shuffle=True)

loaders_transfer = {
    'train': train_loader,
    'test': test_loader,
    'valid': valid_loader
}
number of train data is: 6680
number of test data is: 836
number of valid data is: 835

(IMPLEMENTATION) Model Architecture

Use transfer learning to create a CNN to classify dog breed. Use the code cell below, and save your initialized model as the variable model_transfer.

In [ ]:
# This cell has been run before and we knwo that the number of classes would be 133.
from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True

max_of_targets = -1

for b, (data, target) in enumerate(loaders_transfer['train']):
    max_val, max_ind = torch.max(target, 0)
    #     print(max_val)
    
    if max_val > max_of_targets:
        max_of_targets = max_val
        print(max_of_targets)
        
num_of_classes = max_of_targets.item()+1
In [8]:
num_of_classes = 133 #to avoid running the cell above we have assigned the number of classes directly
In [9]:
import torchvision.models as models
import torch.nn as nn

## TODO: Specify model architecture 
model_transfer = models.vgg16(pretrained=True)

for param in model_transfer.features.parameters():
    param.require_grad = False

if use_cuda:
    model_transfer = model_transfer.cuda()
    
print(model_transfer)
VGG(
  (features): Sequential(
    (0): Conv2d(3, 64, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (1): ReLU(inplace)
    (2): Conv2d(64, 64, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (3): ReLU(inplace)
    (4): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
    (5): Conv2d(64, 128, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (6): ReLU(inplace)
    (7): Conv2d(128, 128, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (8): ReLU(inplace)
    (9): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
    (10): Conv2d(128, 256, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (11): ReLU(inplace)
    (12): Conv2d(256, 256, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (13): ReLU(inplace)
    (14): Conv2d(256, 256, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (15): ReLU(inplace)
    (16): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
    (17): Conv2d(256, 512, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (18): ReLU(inplace)
    (19): Conv2d(512, 512, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (20): ReLU(inplace)
    (21): Conv2d(512, 512, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (22): ReLU(inplace)
    (23): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
    (24): Conv2d(512, 512, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (25): ReLU(inplace)
    (26): Conv2d(512, 512, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (27): ReLU(inplace)
    (28): Conv2d(512, 512, kernel_size=(3, 3), stride=(1, 1), padding=(1, 1))
    (29): ReLU(inplace)
    (30): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
  )
  (classifier): Sequential(
    (0): Linear(in_features=25088, out_features=4096, bias=True)
    (1): ReLU(inplace)
    (2): Dropout(p=0.5)
    (3): Linear(in_features=4096, out_features=4096, bias=True)
    (4): ReLU(inplace)
    (5): Dropout(p=0.5)
    (6): Linear(in_features=4096, out_features=1000, bias=True)
  )
)
In [10]:
num_of_input_features = model_transfer.classifier[6].in_features
model_transfer.classifier[6].out_features

# last_layer = nn.Linear(num_of_input_features, num_of_classes)

# model_transfer.classifier[6] = last_layer

in_0 = model_transfer.classifier[0].in_features
# out_0 = model_transfer.classifier[0].out_features
# in_3 = model_transfer.classifier[0].in_features
# out_3 = model_transfer.classifier[0].out_features
# in_6 = model_transfer.classifier[0].in_features
# out_6 = model_transfer.classifier[0].out_features

transfer_fc1 = nn.Linear(in_0, 500)
transfer_fc2 = nn.Linear(500, 250)
transfer_fc3 = nn.Linear(250, num_of_classes)

model_transfer.classifier[0] = transfer_fc1
model_transfer.classifier[3] = transfer_fc2 
model_transfer.classifier[6] = transfer_fc3 

model_transfer = model_transfer.cuda()

Question 5: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. Describe why you think the architecture is suitable for the current problem.

Answer: We know that the network has been composed of two types of layers. One for forming the feature map of the input image whose weights should be frozen. The only thing to be defined is the final classifier. We have keep the previous number for the input number of classifiers, however defined a classifier composed of different linear layers so that we have number of neurons equal to the number of output classes. Again dropout layers are also considered for avoiding overfitting. I have gotten lot of out of memory errors with higher number of neurons in the layers so I think the 500 and 250 are good intermediate numbers to narrow down the number of input neurons to the number of output classes that we have for our dataset which is 133.

(IMPLEMENTATION) Specify Loss Function and Optimizer

Use the next code cell to specify a loss function and optimizer. Save the chosen loss function as criterion_transfer, and the optimizer as optimizer_transfer below.

In [11]:
criterion_transfer = nn.CrossEntropyLoss()
optimizer_transfer = optim.SGD(model_transfer.classifier.parameters(), lr=0.01)

(IMPLEMENTATION) Train and Validate the Model

Train and validate your model in the code cell below. Save the final model parameters at filepath 'model_transfer.pt'.

In [12]:
# train the model

from PIL import ImageFile
ImageFile.LOAD_TRUNCATED_IMAGES = True

def train(n_epochs, loaders, model, optimizer, criterion, use_cuda, save_path):
    """returns trained model"""
    # initialize tracker for minimum validation loss
    valid_loss_min = np.Inf 
    
    for epoch in range(1, n_epochs+1):
        # initialize variables to monitor training and validation loss
        train_loss = 0.0
        valid_loss = 0.0
        
        ###################
        # train the model #
        ###################
        model.train()
        for batch_idx, (data, target) in enumerate(loaders['train']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
                
            ## find the loss and update the model parameters accordingly
            ## record the average training loss, using something like
            ## train_loss = train_loss + ((1 / (batch_idx + 1)) * (loss.data - train_loss))
            optimizer.zero_grad()
            output = model(data)
            loss = criterion(output, target)
            loss.backward()
            optimizer.step()
            train_loss = train_loss + ((1 / (batch_idx + 1)) * (loss.data - train_loss))
            #             train_loss += loss.item() * data.size(0)
            
        ######################    
        # validate the model #
        ######################
        model.eval()
        for batch_idx, (data, target) in enumerate(loaders['valid']):
            # move to GPU
            if use_cuda:
                data, target = data.cuda(), target.cuda()
            
            ## update the average validation loss
            output = model(data)
            loss = criterion(output, target)
            #             valid_loss = loss.item() * data.size(0)
            valid_loss = valid_loss + ((1 / (batch_idx + 1)) * (loss.data - valid_loss))

            #         train_loss = train_loss/len(loaders['train'].dataset)
            #         valid_loss = valid_loss/len(loaders['valid'].dataset)
        
        # print training/validation statistics 
        print('Epoch: {} \tTraining Loss: {:.6f} \tValidation Loss: {:.6f}'.format(
            epoch, 
            train_loss,
            valid_loss
            ))
        
        ## TODO: save the model if validation loss has decreased
        if valid_loss <= valid_loss_min:
            print('Validation loss decreased ({:.6f} --> {:.6f}).  Saving model ...'.format(
            valid_loss_min,
            valid_loss))
            torch.save(model.state_dict(), 'model_transfer.pt')
            valid_loss_min = valid_loss
            
    # return trained model
    return model
   
torch.cuda.empty_cache()
model_transfer = train(20, loaders_transfer, model_transfer,
                       optimizer_transfer, criterion_transfer, use_cuda, 'model_transfer.pt')

# load the model that got the best validation accuracy (uncomment the line below)
model_transfer.load_state_dict(torch.load('model_transfer.pt'))
Epoch: 1 	Training Loss: 4.504778 	Validation Loss: 3.410507
Validation loss decreased (inf --> 3.410507).  Saving model ...
Epoch: 2 	Training Loss: 3.301027 	Validation Loss: 2.342534
Validation loss decreased (3.410507 --> 2.342534).  Saving model ...
Epoch: 3 	Training Loss: 2.682691 	Validation Loss: 1.939683
Validation loss decreased (2.342534 --> 1.939683).  Saving model ...
Epoch: 4 	Training Loss: 2.407425 	Validation Loss: 1.681264
Validation loss decreased (1.939683 --> 1.681264).  Saving model ...
Epoch: 5 	Training Loss: 2.263959 	Validation Loss: 1.564684
Validation loss decreased (1.681264 --> 1.564684).  Saving model ...
Epoch: 6 	Training Loss: 2.120602 	Validation Loss: 1.556998
Validation loss decreased (1.564684 --> 1.556998).  Saving model ...
Epoch: 7 	Training Loss: 2.041331 	Validation Loss: 1.501454
Validation loss decreased (1.556998 --> 1.501454).  Saving model ...
Epoch: 8 	Training Loss: 1.978116 	Validation Loss: 1.446510
Validation loss decreased (1.501454 --> 1.446510).  Saving model ...
Epoch: 9 	Training Loss: 1.904051 	Validation Loss: 1.439331
Validation loss decreased (1.446510 --> 1.439331).  Saving model ...
Epoch: 10 	Training Loss: 1.870779 	Validation Loss: 1.391127
Validation loss decreased (1.439331 --> 1.391127).  Saving model ...
Epoch: 11 	Training Loss: 1.829340 	Validation Loss: 1.407069
Epoch: 12 	Training Loss: 1.822928 	Validation Loss: 1.397667
Epoch: 13 	Training Loss: 1.775926 	Validation Loss: 1.466724
---------------------------------------------------------------------------
KeyboardInterrupt                         Traceback (most recent call last)
<ipython-input-12-6649b231099b> in <module>()
     72 torch.cuda.empty_cache()
     73 model_transfer = train(20, loaders_transfer, model_transfer,
---> 74                        optimizer_transfer, criterion_transfer, use_cuda, 'model_transfer.pt')
     75 
     76 # load the model that got the best validation accuracy (uncomment the line below)

<ipython-input-12-6649b231099b> in train(n_epochs, loaders, model, optimizer, criterion, use_cuda, save_path)
     21             # move to GPU
     22             if use_cuda:
---> 23                 data, target = data.cuda(), target.cuda()
     24 
     25             ## find the loss and update the model parameters accordingly

KeyboardInterrupt: 

In order to keep my time for GPU environment I have decided just to terminate the training process as it seems that the model has gotten overfit.

(IMPLEMENTATION) Test the Model

Try out your model on the test dataset of dog images. Use the code cell below to calculate and print the test loss and accuracy. Ensure that your test accuracy is greater than 60%.

In [15]:
#Just a reminder: I should run the test cell from the previous part (model from scratch)
test(loaders_transfer, model_transfer, criterion_transfer, use_cuda)
Test Loss: 1.420602


Test Accuracy: 60% (508/836)

(IMPLEMENTATION) Predict Dog Breed with the Model

Write a function that takes an image path as input and returns the dog breed (Affenpinscher, Afghan hound, etc) that is predicted by your model.

In [16]:
### TODO: Write a function that takes a path to an image as input
### and returns the dog breed that is predicted by the model.

# list of class names by index, i.e. a name can be accessed like class_names[0]
# class_names = [item[4:].replace("_", " ") for item in data_transfer['train'].classes]
class_names = [item[4:].replace("_", " ") for item in loaders_transfer['train'].dataset.classes]
# print(len(set(class_names)))
def predict_breed_transfer(img_path):
    # load the image and return the predicted breed    
    img = Image.open(img_path)   
    
    transform = transforms.Compose([
        transforms.Resize((224,224)),
        transforms.ToTensor(),
        transforms.Normalize(mean=[0.485, 0.456, 0.406],
                                 std=[0.229, 0.224, 0.225])
    ])
    
    img = transform(img)
    img = torch.unsqueeze(img,0)
    if use_cuda:
        img = img.cuda()
    val, ind = torch.max(model_transfer(img), 1)
#     print(ind)
    return int(ind) 

Step 5: Write your Algorithm

Write an algorithm that accepts a file path to an image and first determines whether the image contains a human, dog, or neither. Then,

  • if a dog is detected in the image, return the predicted breed.
  • if a human is detected in the image, return the resembling dog breed.
  • if neither is detected in the image, provide output that indicates an error.

You are welcome to write your own functions for detecting humans and dogs in images, but feel free to use the face_detector and human_detector functions developed above. You are required to use your CNN from Step 4 to predict dog breed.

Some sample output for our algorithm is provided below, but feel free to design your own user experience!

Sample Human Output

(IMPLEMENTATION) Write your Algorithm

In [17]:
def preprocess(image_path):
    img = Image.open(image_path)
    plt.imshow(img)
    plt.show()
    transform = transforms.Compose([
    transforms.Resize((224,224)),
    transforms.ToTensor(),
    transforms.Normalize(mean=[0.485, 0.456, 0.406],std=[0.229, 0.224, 0.225])])
    
    img = transform(img)
    img = torch.unsqueeze(img,0)
    if use_cuda:
        img = img.cuda()
#         print(img)
    return img
In [18]:
### TODO: Write your algorithm.
### Feel free to use as many code cells as needed.

def run_app(img_path):
    ## handle cases for a human face, dog, and neither
    prepared_image = preprocess(img_path)
#     print(prepared_image)
    if dog_detector(img_path):
        val, ind = torch.max(model_transfer(prepared_image), 1)
        ind = ind.data.cpu().numpy()[0]
#         print(val)
        breed = class_names[ind]
        print("The dog is: "+str(breed))
        
    elif face_detector(img_path):
        print("human face is detected...\n")
#         print(model_transfer(prepared_image))
#         val, ind = torch.max(model_transfer(prepared_image), 1)
#         ind = ind.data.cpu().numpy()[0]
#         print(val)
        output = model_transfer(prepared_image)
        pred = output.data.max(1, keepdim=True)[1]
        print("the prediction is: "+str(pred))
        breed = class_names[pred]
        print("The face is similar to: "+str(breed))
        
    else:
        print("Error: No human face and dog was detected.")

Step 6: Test Your Algorithm

In this section, you will take your new algorithm for a spin! What kind of dog does the algorithm think that you look like? If you have a dog, does it predict your dog's breed accurately? If you have a cat, does it mistakenly think that your cat is a dog?

(IMPLEMENTATION) Test Your Algorithm on Sample Images!

Test your algorithm at least six images on your computer. Feel free to use any images you like. Use at least two human and two dog images.

Question 6: Is the output better than you expected :) ? Or worse :( ? Provide at least three possible points of improvement for your algorithm.

Answer: (Three possible points for improvement)

  • Firstly, if there would be less limitation for computation power and also time limitation, I would choose higher number of neurons put on the classifier layers.
  • This may raise the the need of incresing the number of dataset which will provide the network with a higher information.
  • And finally maybe VGG16 is not the best choice for forming the feature maps to the classifiers. I have not tried the other structures as I have time limitation in Udacity environment. Also training on GPU even takes time for my laptop. So I cannot garauntee that the model that we have exploited necessarily yields the best performance.
In [29]:
## TODO: Execute your algorithm from Step 6 on
## at least 6 images on your computer.
## Feel free to use as many code cells as needed.

## suggested code, below
for file in np.hstack((human_files[:30], dog_files[:10])):
    run_app(file)
human face is detected...

the prediction is: tensor([[ 13]], device='cuda:0')
The face is similar to: Basenji
human face is detected...

the prediction is: tensor([[ 119]], device='cuda:0')
The face is similar to: Pharaoh hound
human face is detected...

the prediction is: tensor([[ 87]], device='cuda:0')
The face is similar to: Irish water spaniel
human face is detected...

the prediction is: tensor([[ 51]], device='cuda:0')
The face is similar to: Clumber spaniel
human face is detected...

the prediction is: tensor([[ 36]], device='cuda:0')
The face is similar to: Brittany
human face is detected...

the prediction is: tensor([[ 13]], device='cuda:0')
The face is similar to: Basenji
human face is detected...

the prediction is: tensor([[ 89]], device='cuda:0')
The face is similar to: Italian greyhound
human face is detected...

the prediction is: tensor([[ 7]], device='cuda:0')
The face is similar to: American staffordshire terrier
human face is detected...

the prediction is: tensor([[ 7]], device='cuda:0')
The face is similar to: American staffordshire terrier
human face is detected...

the prediction is: tensor([[ 47]], device='cuda:0')
The face is similar to: Chihuahua
human face is detected...

the prediction is: tensor([[ 119]], device='cuda:0')
The face is similar to: Pharaoh hound
human face is detected...

the prediction is: tensor([[ 119]], device='cuda:0')
The face is similar to: Pharaoh hound
human face is detected...

the prediction is: tensor([[ 119]], device='cuda:0')
The face is similar to: Pharaoh hound
human face is detected...

the prediction is: tensor([[ 13]], device='cuda:0')
The face is similar to: Basenji
human face is detected...

the prediction is: tensor([[ 75]], device='cuda:0')
The face is similar to: Golden retriever
human face is detected...

the prediction is: tensor([[ 45]], device='cuda:0')
The face is similar to: Cavalier king charles spaniel
human face is detected...

the prediction is: tensor([[ 51]], device='cuda:0')
The face is similar to: Clumber spaniel
human face is detected...

the prediction is: tensor([[ 47]], device='cuda:0')
The face is similar to: Chihuahua
human face is detected...

the prediction is: tensor([[ 111]], device='cuda:0')
The face is similar to: Nova scotia duck tolling retriever
human face is detected...

the prediction is: tensor([[ 46]], device='cuda:0')
The face is similar to: Chesapeake bay retriever
human face is detected...

the prediction is: tensor([[ 63]], device='cuda:0')
The face is similar to: English toy spaniel
human face is detected...

the prediction is: tensor([[ 81]], device='cuda:0')
The face is similar to: Havanese
human face is detected...

the prediction is: tensor([[ 18]], device='cuda:0')
The face is similar to: Bedlington terrier
human face is detected...

the prediction is: tensor([[ 46]], device='cuda:0')
The face is similar to: Chesapeake bay retriever
human face is detected...

the prediction is: tensor([[ 59]], device='cuda:0')
The face is similar to: Dogue de bordeaux
human face is detected...

the prediction is: tensor([[ 98]], device='cuda:0')
The face is similar to: Lhasa apso
human face is detected...

the prediction is: tensor([[ 119]], device='cuda:0')
The face is similar to: Pharaoh hound
human face is detected...

the prediction is: tensor([[ 7]], device='cuda:0')
The face is similar to: American staffordshire terrier
human face is detected...

the prediction is: tensor([[ 119]], device='cuda:0')
The face is similar to: Pharaoh hound
human face is detected...

the prediction is: tensor([[ 7]], device='cuda:0')
The face is similar to: American staffordshire terrier
The dog is: Bullmastiff
The dog is: Mastiff
The dog is: Bullmastiff
The dog is: Mastiff
The dog is: Mastiff
The dog is: Mastiff
The dog is: Cane corso
The dog is: Mastiff
The dog is: Plott
The dog is: Plott
In [ ]: